Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 is not able to reach the WebServer. Initial troubleshooting shows that DSW1 can ping the Fa0/1interface of R4 but not the s0/0/0/0.34 interface. Configurationon DSW1 router eigrp 10 network 10.1.4.4 0.0.0.0 network 10.2.1.1 0.0.0.0 network 10.2.4.13 0.0.0.0 no auto-summary Configurationon DSW2 router eigrp 10 network 10.1.4.8 0.0.0.0 network 10.2.2.1 0.0.0.0 network 10.2.4.14 0.0.0.0 no auto-summary Configurationon R4 router eigrp 1 network 10.1.4.5 0.0.0.0 no auto-summary redistribute ospf 1 On which device is the fault condition located?()
The network setup for this trouble ticket is shown in Figure 3. Trouble Ticket Statement DSW1 and R4 cannot ping R2’s loopback or R2’s s0/0/0/0.12 IPv6 address. Initial troubleshooting showsand R2 is not an OSPFv3 neighbor on R3. Configurationon R2 ipv6 unicast-routing! ipv6 router ospf 6 router-id 2.2.2.2! interface s0/0/0/0.23 ipv6 address 2026::1:1/122 ConfigurationR3 ipv6 unicast-routing! ipv6 router ospf 6 router-id 3.3.3.3! interface s0/0/0/0.23 ipv6 address 2026::1:2/122 ipv6 ospf 6 area 0 Figure 3 On Which device is the fault condition located?()
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 and Client 2 are getting a 169.x.x.x IP address and are not able to ping DSW1 or the FTP Server.They are able to ping each other. Configurationon ASW1 Interface PortChannel13 switchport mode trunk switchport trunk allowed vlan 1-9! Interface PortChannel23 switchport mode trunk switchport trunk allowed vlan 1-9! Interface FastEthernet1/0/1 switchport mode access switchport access vlan 10! Interface FastEthernet1/0/2 switchport mode access switchport access vlan 10! The Fault Condition is related to which technology?()
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client one is getting a 169.x.x.x IP address and is not able to ping Client 2 or DSW1. Inital troubleshootingshows that port Fa1/0/1 on ASW1 is in errdisable state. Cisco 642-832: Practice Exam Configurationon ASW1 Interface FastEthernet1/0/1 switchport mode access switchport port-security switchport port-security mac-address 0000.0000.0001 On which device is the fault condition located?()
Following ticket consists of a problem description and existing configuration on the device. Cisco 642-832: Practice Exam Figure 1 Figure 2 Trouble Ticket Statement Client 1 is able to ping 209.65.200.226 but not the Web Server at 209.65.200.241. Initial troubleshootingshows and R1 does not have any BGP routes. R1 also does not show any active Cisco 642-832: Practice Exam BGP neighbor Configuration on R1 router bgp 65001 no synchronization bgp log-neighbor-changes network 209.65.200.224 mask 255.255.255.252 neighbor 209.56.200.226 remote-as 65002 no auto-summary What is the solution of the fault condition?()
It's more()to buy a season ticket if you travel every day
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Cisco 642-832: Practice Exam Figure 2 Trouble Ticket Statement: Client 1 is able to ping 10.1.1.2 but not 10.1.1.1. Initial troubleshooting shows that R1 does not have anyOSPF neighbors or any OSPF routes Configuration on R1: router ospf 1 CertKiller.com log-adjacency-changes network 10.1.1.0 0.0.0.3 area 12 default-information originate always! interfaceSerial0/0/0/0.12 point-to-point ip address 10.1.1.1 255.255.255.252 ip nat inside ip ospf message-digest-key 1 md5 TSHOOT Configuration on R2: router ospf 1 log-adjacency-changes network 10.1.1.0 0.0.0.3 area 12! Cisco 642-832: Practice Exam interfaceSerial0/0/0/0.12 point-to-point ip address 10.1.1.2 255.255.255.252 ip ospf authentication message-digest ip ospf message-digest-key 1 md5 TSHOOT What is the solution of the fault condition?()
TCM Ticket Checking Machine 是指什么?
The network setup for this trouble ticket is shown in Figure 3. Trouble Ticket Statement DSW1 and R4 cannot ping R2’s loopback or R2’s s0/0/0/0.12 IPv6 address. Initial troubleshooting showsand R2 is not an OSPFv3 neighbor on R3. Configurationon R2 ipv6 unicast-routing! ipv6 router ospf 6 router-id 2.2.2.2! interface s0/0/0/0.23 ipv6 address 2026::1:1/122 ConfigurationR3 ipv6 unicast-routing! ipv6 router ospf 6 router-id 3.3.3.3! interface s0/0/0/0.23 ipv6 address 2026::1:2/122 ipv6 ospf 6 area 0 Figure 3 What is the solution of the fault condition?()
She was caught without a ticket and fined thirty dollars ()