During maneuvering operations for a direct reversing large, low-speed, main propulsion diesel engine, which of the following actions is used to stop the shaft from turning prior to reversing the engine rotation?()
The reversing cams of some four-stroke/cycle diesel engines are brought into position by ()
We took usual steps:sounding the depth,reversing and stopping engine,paying out anchor and 60 fathoms of chain cable in the depth of 12 fathoms.The operation above is().
The reversing cams of some four-stroke/cycle diesel engines are brought into position by ()
We took usual steps:sounding the depth, reversing and stopping engine,paying out anchor and 60 fathoms of chain cable in the depth of 12 fathoms.The operation above is().
The underlined word “reversing” in Paragraph 3 is closest in meaning to ______.
When used with reversing reduction gears, medium-speed diesel engines should be bolted to their foundations with fitted bolts at the drive end and clearance(loosely fitted) bolts in other locations √This is done to ()
While underway, which of the following would be the FIRST step in reversing a direct reversing large, low-speed, main propulsion, diesel engine?()
When used with reversing reduction gears, medium-speed diesel engines should be bolted to their foundations with fitted bolts at the drive end and clearance(loosely fitted) bolts in other locations √This is done to ()
A large two-stroke/cycle direct reversing diesel engine is to be reversedPrior to the admission of starting air you must ()