- Yes, I will try my best.()
With the introduction of()technology, information flows faster than it ever did.
Passage 2
Automation refers to the introduction of electronic control and automatic operation of productive machinery. It reduces the human factors: mental and physical, in production, and is designed to make 1 the manufacture of more goods with 2 workers. The development of automation in American industry has been called “the Second 3 Revolution.
Labor’s concern 4 automation 5 from uncertainty about its effects on employment, and fears of major changes in jobs. In the main, labor has 6 the view that 7 to technological change is futile. In the long run, the result of automation may well be an increase in employment, since it is expected that vast industries will grow up around manufacturing, 8 and repairing automation equipment. Unquestionably, 9 , there will be major shifts in jobs within plants, and displacement of labor from one industry to another. The interest of labor lies in 10 this transition with a 11 of inconvenience and distress 12 workers involved. Also, union spokesmen emphasize that the benefit of the increased production and lower cost by automation should be shared by workers in the 13 of higher wages, more leisure, and improved living standards.
To protect the interests of their members in the era of automation, unions have adopted a number of new policies. One of these is the 14 of supplementary unemployment benefits plans. It is emphasized that since the employer involved in a SUB plan has a direct financial stake in preventing unemployment, he will have a strong 15 for planning new installation so as to cause the least possible disruption in jobs and job assignments. Some unions are working for dismissal pay agreements, requiting that permanently. 16 -off workers be paid a sum of money based on 17 of service. Another approach is the idea of the “improvement factor”, which calls 18 wage increases based on increased in 19 . It is probable, however, that labor will rely mainly on reduction in working hours in order to gain a full share in the 20 of automation.
1. A. possible B. probable C. necessary D. acceptable
2. A. few B. fewer C. many D. more
3. A. Automation B. Industrial C. Industrialized D. Industrious
4. A. in B. upon C. over D. with
5. A. rises B. arises C. arouses D. evokes
6. A. taken B. got C. gained D. used
7. A. struggle B. resistance C. objection D. unfavor
8. A. conserving B. storing C. maintaining D. preserving
9. A. however B. somehow C. nevertheless D. conversely
10. A. bringing about B. bringing out C. reduction D. limitation
12. A. for B. upon C. about D. to
13. A. term B. approach C. access D. from
14. A. promotion B. support C. decrease D. discouragement
15. A. encouragement B. stimulation C. incentive D. interest
16. A. lain B. lay C. lied D. laid
17. A. span B. term C. length D. period
18. A. at B. on C. up D. for
19. A. production B. productivity C. industry D. manufacture
20. A. results B. fruits C. consequences D. essence
Test 5 The introduction of computers into classroom has greatly changed the traditional way of teaching and learning. Will computers replace teachers? The following are the supporters’ and opponents’ opinions. Read carefully the opinions from both sides and write your response in about 200 words, in which you should first summarize briefly the opinions from both sides and give your view on the issue.
Marks will be awarded for content relevance, content sufficiency, organization and language quality. Failure to follow the above may result in a loss of marks.
Discuss, and decide together:
● What the likely reactions from staff might be to the introduction of the scheme?
● How feedback should be given to staff on their performance?
With the introduction of the motorbus, the tramway suddenly seemed comparatively expensive to operate, and the ______ it enjoyed in the early 1900's diminished.
Passage 1
The Rollfilm Revolution The introduction of the dry plate process brought with it many advantages. Not only was it much more convenient, so that the photographer no longer needed to prepare his material in advance, but its much greater sensitivity made possible a new generation of cameras. Instantaneous exposures had been possible before, but only with some difficulty and with special equipment and conditions. Now, exposures short enough to permit the camera to be held in the hand were easily achieved. As well as fitting shutters and viewfinders to their conventional stand cameras, manufacturers began to construct smaller cameras intended specifically for hand use.
One of the first designs to be published was Thomas Bolas’s “Detective” camera of 1881. Externally a plain box, quite unlike the folding bellows camera typical of the period, it could be used unobtrusively. The name caught on, and for the next decade or so almost all hand cameras were called “Detectives”. Many of the new designs in the 1880s were for magazine cameras, in which a number of dry plates could be pre-loaded and changed one after another following exposure. Although much more convenient than stand cameras, still used by most serious workers, magazine plate cameras were heavy, and required access to a darkroom for loading and processing the plates. This was all changed by a young American bank clerk turned photographic manufacturer, George Eastman, from Rochester, New York.
Eastman had begun to manufacture gelatine dry plates in 1880, being one of the first to do so in America. He soon looked for ways of simplifying photography, believing that many people were put off by the complication and messiness. His first step was to develop, with the camera manufacturer William H. Walker, a holder for a long roll of paper negative “film”. This could be fitted to a standard plate camera and up to forty-eight exposures made before reloading. The combined weight of the paper roll and the holder was far less than the same number of glass plates in their light-tight wooden holders. Although roll-holders had been made as early as the 1850s, none had been very successful because of the limitations of the photographic materials then available. Eastman’s rollable paper film was sensitive and gave negatives of good quality; the Eastman-Walker roll-holder was a great Success.
The next step was to combine the roll-holder with a small hand camera: Eastman’s first design was patented with an employer F. M. Cossitt, in 1886. It was not a success. Only fifty Eastman detective cameras were made, and they were sold as a lot to a dealer in 1887; the cost was too high and the design too complicated. Eastman set about developing a new model, which was launched in June 1888. It was a small box, containing a roll of paper-based stripping film sufficient for 100 circular exposures 6 cm in diameter. Its operation was simple: set the shutter by pulling a wire string; aim the camera using the V line impression in the camera top; press the release button to activate the exposure; and turn a special key to wind on the film. A hundred exposures had to be made, so it was important to record each picture in the memorandum book provided, since there was no exposure counter. Eastman gave his camera the invented name “Kodak”, which was easily pronounceable in most languages, and had two Ks which Eastman felt was a firm, uncompromising kind of letter.
The importance of Eastman’s new roll-film camera was not that it was the first. There had been several earlier cameras, notably the Stirn “America”, first demonstrated in the spring of 1887 and on sale from early 1888. This also used a roll of negative paper, and had such refinements as a reflecting viewfinder and an ingenious exposure marker. The real significance of the first Kodak camera was that it was backed up by a developing and printing service. Hitherto, virtually all photographers developed and printed their own pictures. This required the facilities of a darkroom and the time and inclination to handle the necessary chemicals, make the prints and so on. Eastman recognized that not everyone had the resources or the desire to do these. When a customer had made a hundred exposures in the Kodak camera, he sent it to Eastman’s factory in Rochester where the film was unloaded, processed and printed, the camera reloaded and returned to the owner. “You Press the Button, We Do the Rest” ran Eastman’s classic marketing slogan; photography had been brought to everyone. Everyone, that is, who could afford $25 or five guineas for the camera and $10 or two guineas for the developing and printing. A guinea ($5) was a week’s wages for many at the time, so this simple camera cost the equivalent of hundreds of dollars today.
In 1889 an improved model with a new shutter design was introduced, and it was called the No. 2 Kodak camera. The paper-based stripping film was complicated to manipulate, since the processed negative image had to be stripped from the paper base for printing. At the end of 1889 Eastman launched a new roll film on a celluloid base. Clear, tough, transparent and flexible, the new film not only made the roll-film camera fully practical, but provided the raw material for the introduction of cinematography a few years later. Other, larger models were introduced, including several folding versions, one of which took pictures 21.6 cm × 16.5 cm in size. Other manufacturers in America and Europe introduced cameras to take the Kodak roll-films, and other firms began to offer developing and printing services for the benefit of the new breed of photographers. By September 1889, over 5,000 Kodak cameras had been sold in the USA, and the company was daily printing 6,000-7,000 negatives. Holidays and special events created enormous surges in demand for processing: 900 Kodak users returned their cameras for processing and reloading in the week after the New York centennial celebration.
Complete the diagram below.
Choose NO MORE THAN THREE WORDS from the passage for each answer.
Write your answers in boxes 1-5 on your answer sheet.
With the introduction of the electronic computer, there is no complicated problem _____ can be solved in a few hours.
_____